Loading... Please wait...


Our Newsletter

AvianiX HydroPowder

  • Image 1
Calculated at checkout

Product Description

AvianiX introduces a worlds first with HydroPowder for Dye Sublimation - Totally redefining the Powder Coatings industry and how Powder Coatings can be applied!

 Typically an item that is going to be decorated with the dye sublimation technology needs to be made of polyester based materials, or have a coating that is polyester based for the dye sublimation inks to decorate into under heat (360F - 400F) and pressure.

With our HydroPowder solution, it allows for customers to coat hundreds of surfaces (as long as they can withstand the dye sublimation ink transfer times and pressures), and then decorate/image the items. The items can be coated for flat, 2D, and 3D dye sublimation decoration. Products coated with our HydroPowder can then be decorated with our NeonTack dye sublimation inks, regular dye sublimation inks, or offset sublimation inks and transfer methods. Our HydroPowder coating technology opens the markets to allow hundreds of surfaces and items to be dye sublimation decorated.

Normally items that are going to be powder coated need to be able to hold an electrostatic charge so that the powder coatings will be able to attach to the surface of the product. With our technology we use our water-based HydroPowder Carrier Base (water-based 0 voc), mixed in volume of weight 50/50% (roughly) with the powder coating (several types / depending on the surface your coating and desired results)(also 0 voc), and then applied by spraying, rolling, or brushing the liquid coatings onto the part. Now powder coaters and powder coating companies will also be able to powder coat hundreds of surfaces they could not do before as well, and get total protection through our HydroPowder liquid/powder coating solution without having to worry about if the item could hold an electrostatic charge. Globally changes the powder coating industry!!

PRODUCT DESCRIPTION: Powder coating is a popular method of protecting and enhancing the appearance of a part. It is a very "Green" technology and the use of this technology is expanding. However there are some applications where the use of Powder Coating is difficult if not impossible. It has a fair bond to metallic substrates, though the powder is easily damaged prior to baking. Powder Coating of non metallic surfaces is extremely difficult. In addition complex shapes, deep depressions, voids or holes cannot be evenly coated. Generally it is also not possible to multi coat using traditional Powder Coating methods. This situation has been dramatically changed with the introduction of the HydroPowder technology. Now virtually any powder can be mixed in to the HydroPowder carrier and sprayed as conventional water based paint. The type of substrate is not an issue, multi coats, special effects, and a host of other custom treatments become available. Superior chemical and corrosion protection to standard Powder Coated parts (with our Powder Coatings for dye sublimation (in case of sublimation products decoration)), is the result.

hydropowderbase.jpg    Once the product is smoothly coated (which even "Fred in the Shed" can do)  it is left to dry (30 minutes - 2 hours / which can be accelerated by blowing with a heat gun or running the part through a heat tunnel). The HydroPowder Carrier Base completely evaporates, leaving the part totally HydroPowder coated. Unlike normal powder coating, you don't have to then worry about the powder coating shaking off. The powder coating is securely on the part and needs to be then be heat cured onto the part (the temperature of the cure depends on the powder coatings being used in this HydroPowder process).

Once the part is heat cured the product is ready to be imaged/decorate with the proper dye sublimation method. You will be totally amazed at the finished products that you can now decorated with stunning and extremely long lasting results.

The HydroPowder Carrier Base is priced at $140.00 per gallon (Minimum order) .  The cost of the specific powder coating to be used in combination in the HydroPowder mix is going to be determined according to the item, the desired results, and the volume of powder coatings needed. We will have out our powder coating cost and pricing by the end of August 2013. If you need information now, please send us an email:  info@AvianiX.com

For those companies and/or individuals that are simply not able to apply the HydroPowder coatings because of technical knowledge or capabilities, we will have application facilities and dealers worldwide that can do the coating of your products and parts. Send us an email: info@AvianiX.com

We just introduced this technology on 8/1/2013 and AvianiX LLC has the global rights exclusively to this application method, materials, and powder coatings we are working with. We are looking for global dealers/distributors/ and application companies. If you or your company are interested please send us an email:  info@AvianiX.com



Find Similar Products by Tag

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the AvianiX HydroPowder to your wish list.

You Recently Viewed...